From the FRU Summary page, click Battery. Workaround—Go to the secondary array and delete the partner replication set from that array. If the serial number for the battery starts with an "S,” it's a Smart battery.
Dec 20 16:16:05 ares This may result in reduced system performance. Taking default action: kill. Other forms of addressing the wide port are still in force. Sun Blade 6000 firmware upgrade fails with down-level expander Bug 15639625 (6948014)—An attempt to upgrade Sun Blade 6000 firmware fails if the associated NEM is not at current revision level.
Assembled 16 August 2007 Solaris 10 has many Versions ! All rights reserved. Andrew Watkins wrote: > He is the full contents of /var/adm/messages. For controllers with firmware 07.15.11.12 or later (6000 series) and firmware 07.35.10.10 or later (2500 series): Controller A reboots if counter is greater than 820 days.
I had to remove an ISA sound board for Solaris 10 to work on my PC. To obtain the IPV6 IP address, Routable IP address, and Router IP address for the array, use the netCfgShow command via the array serial port. The import job will not be started and no settings on the target array will be changed. Service Advisor: replacing failed SIM with dual path configurations If you have dual paths to hosts in zones with cascaded JBODs and you need to replace a failed SIM, you might
this definitely doesn't look like a graphics problem ... http://osdir.com/ml/os.solaris.opensolaris.xen/2007-12/msg00217.html Plz Help. Workaround—Wait 5 minutes for the agent to run or run the agent manually. Do other panics which you attribute to bad graphics have a similar stack?
Create Snapshot fails using CLI Bug 15850154—When using the CLI to create a snapshot, the error “failure to find resources” occurs. http://savecomputer.net/failed-to/failed-to-initialize-directdraw.html But if You have problems with the installed hardware please searching for the HCL List of sun, for support of hardware components Sun Microsystems - BigAdmin - Solaris OS: Hardware Compatibility Support data for an array is collected and saved in the Common Array Manager by selecting array > General Configuration > Support Data. From the Component Summary page for the battery, look at the serial number in the Unique Identifier column.
The correct information is this: Only Simplex 2501 expansion modules may be attached to a Simplex 2500 series controller tray. I did say "stack", didn't I? :-) > If you want any thing from crash dump let me know (please give the relevant > commands since my mdb is very poor) For more information, see the SAS Compatibility Firmware Guide. have a peek here I thought itd because of video settins, i tried kdmconfig (or)/usr/X11/bin/Xorg commands in Fail safe mode.
My AccountSearchMapsYouTubePlayNewsGmailDriveCalendarGoogle+TranslatePhotosMoreShoppingWalletFinanceDocsBooksBloggerContactsHangoutsEven more from GoogleSign inHidden fieldsSearch for groups or messages UNIX & Linux Forums > Operating Systems > Solaris Member Name Remember Me? disks) due to changes in Access Configuration, cable re-configuration, firmware upgrades, or the addition of new storage can potentially cause the host to hang or panic due to known Linux kernel Workaround—Use paginated view to delete volumes.
First upgrade only the controller firmware, and then upgrade the drive firmware.
Is there any solution for this without reformatting & reinstalling the OS ??? This issue is fixed in F5100 expander firmware 5.4.4. Workaround—Contact Support at https://support.oracle.com and reference this Bug number. Currently, this generates warnings whenever an administrator installs other unrelated products such as RPMS, HBA management applications, or failover RDAC packages.
Then resume the disk drive firmware upgrade. This configuration is invalid. But its not working. Check This Out Workaround—If you are using Veritas with DMP, refer to Veritas support (http://www.symantec.com/support/contact_techsupp_static.jsp) for a recommended host type.
This bug leads to performance issues with RAID 5 configurations. Under the Name column, click the battery name. Use is subject to license terms. If the battery is a non-Smart battery, these two fields are not present.
False means the disk is not locked. Only ValueChangeEvents [such as (Status +) from Removed to OK for disk in slot x] are generated. Workaround—Refer to the Alarm Summary page and Event Details page to get information about major events that occur on the array. Array loses communication during registration when IPV6 is enabled Bug 15744716 (7096012)—The IPV6 Routable address is not being set correctly during array registration.
The Solaris OS is now owned by Oracle. Workaround—You can enable IPV4 for the array, or configure the CAM host and the array to be on the same subnet. On Controller Summary page, click Specify Network Configuration under the IPV6 section. Forum Operations by The UNIX and Linux Forums UNIX & Linux Forums > Operating Systems > Solaris Member Name Remember Me?
However, the updated firmware is not reflected in the GUI.
vvv Home | News | Sitemap | FAQ | advertise | OSDir is an Inevitable website. Bug 15493007 (6723686)—J4x00 failed disk drive (Sun StorageTek SAS RAID HBA) not reported.